Browsing by Author "Keating, Pierre"

Now showing 1 - 2 of 2

Case history of combined airborne time-domain electromagnetics and power-line field survey in Chibougamau, Canada
(2010-03-01) Vallée, Marc A.; Smith, Richard S.; Keating, Pierre
Exploration for volcanogenic massive sulfides requires good geologic understanding. Geologic knowledge often is limited by a lack of outcrops. This is especially true in Canada under residual glacial covers. Geologic information must therefore be complemented by information obtained using means such as geophysical and geochemical observations. Electromagnetic (EM) methods extend lithological understanding to depths beyond the overburden. Massive sulfides are highly conductive and, depending on their depth and volume, may be detected easily by airborne EM surveys. They are more often equant than graphitic sediments, which typically have longer strike length. Current EMtechniques that identify massive sulfides operate in the frequency or time domain, the latter being more common. Additional information can be provided by using power-line fields as a source of EM signals when the powerlines are appropriately located in the area of interest. We have worked in an active exploration area near Chibougamau, Canada, known for a large occurrence of massive sulfide deposits. The geology is a sequence of volcanic formations with felsic and mafic intrusions. Our magnetic technique responded well to mafic rocks. An airborne time-domain EM survey mapped localized and intrasedimentary conductors in that area. We learned in our study that power-line EM fields can be used to map large-extent conductive formations and narrow geologic faults.
Metalliferous mining geophysics — State of the art after a decade in the new millennium
(2011-06-03) Vallée, Marc A.; Smith, Richard S.; Keating, Pierre
Mining exploration was very active during the first decade of the twenty-first century because there were numerous advances in the science and technology that geophysicists were using for mineral exploration. Development came from different sources: instrumentation improvements, new numerical algorithms, and cross-fertilization with the seismic industry. In gravity, gradiometry kept its promise and is on the cusp of becoming a key technology for mining exploration. In potential-field methods in general, numerous techniques have been developed for automatic interpretation, and 3D inversion schemes came into frequent use. These inversions will have even greater use when geologic constraints can be applied easily. In airborne electromagnetic (EM) methods, the development of time-domain helicopter EM systems changed the industry. In parallel, improvements in EM modeling and interpretation occurred; in particular, the strengths and weaknesses of the various algorithms became better understood. Simpler imaging schemes came into standard use, whereas layered inversion seldom is used in the mining industry today. Improvements in ground EM methods were associated with the development of SQUID technology and distributed-acquisition systems; the latter also impacted ground induced-polarization (IP) methods. Developments in borehole geophysics for mining and exploration were numerous. Borehole logging to measure physical properties received significant interest. Perhaps one reason for that interest was the desire to develop links between geophysical and geologic results, which also is a topic of great importance to mining geologists and geophysicists.